Microcontroller ATmega
 |
CM-5 Main ControllerSG$110.00 |
| BIOLOID main controller [Product Details...] | |
 |
Cerebot IISG$64.00 |
| •Atmel ATmega64 with 64KB Flash, 4KB SRAM, 2KB EEPROM •Intended for use with Atmel AVR Studio & WinAVR •Programmable via Digilent JTAG USB cable, Atmel AVR ISP, or Atmel JTAG ICE mk-II •Connectors: Five 12-pin Pmod, three 6-pin Pmod, eight R/C servo, [Product Details...] | |
 |
Orangutan SV-328 Robot ControllerSG$92.70 |
| The Orangutan is small enough for integrating into a small robot, rather than being the small robot. With Atmel’s powerful ATmega328P AVR microcontroller, motor drivers, buttons, display, and buzzer, all you need to add is your own chassis, sensors, softw [Product Details...] | |
 |
Orangutan LV-168 Robot ControllerSG$92.30 |
| The Orangutan LV-168 is a full-featured controller for low-voltage robots. Thanks to a step-up voltage regulator, you can power this Orangutan with two or three 1.2-1.5 V batteries while maintaining 5 V operation for its Atmel mega168 AVR microcontroller [Product Details...] | |
 |
Baby Orangutan B-328 Robot ControllerSG$45.90 |
| Baby Orangutan is a very compact complete control solution for small robots, all packed into a tiny 1.2" x 0.7" 24-pin DIP package. The ATmega328P AVR microcontroller include a dual H-bridge for direct control of two DC motors. [Product Details...] | |
 |
Orangutan SVP-1284 Robot ControllerSG$118.70 |
| Based on the new ATmega1284 AVR microcontroller (128 KB flash, 16 KB RAM, 4 KB EEPROM) and featuring higher-power dual motor drivers (2 A continuous per channel), a bigger 16×2 LCD, and a demultiplexer for easy control of up to eight servos, the Orangutan [Product Details...] | |
 |
Orangutan X2 with VNH2 and LCDSG$187.70 |
| The Orangutan X2 has two microcontrollers: an Atmel ATmega644 AVR for the main application, and an auxiliary ATmega168 that interfaces to most of the dedicated hardware on the X2 and serves as a programmer for the main processor. •2 high-power, bidirectio [Product Details...] | |
 |
Arduino with built in 2 Channel Motor DriverSG$39.90 |
| The Arduino All-in-One microcontroller is especially designed for robotics application and supports the Arduino open source platform, which have thousands of open source codes. The integrated 2 way DC motor driver and wireless socket gives a much easier w [Product Details...] | |
 |
ATmega328 with Arduino Optiboot BootloaderSG$7.80 |
| An ATmega328 in DIP package, pre-loaded with the Arduino (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. [Product Details...] | |
 |
Arduino FioSG$33.00 |
| The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad. [Product Details...] | |
 |
Arduino Pro 328 - 5V/16MHzSG$26.40 |
| SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 328' within the Arduino software). The power switch was moved to the side of the board to allow control when a shield is attac [Product Details...] | |
 |
AVR 28 Pin 20MHz 32K 6A/D - ATMega328SG$6.80 |
| Atmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC. Runs up to 20MHz with external crystal. Package can be programme [Product Details...] | |
 |
Red Back Spider robot - 48 servos controllerSG$87.00 |
| The Spider robot controllers were designed for robots requiring a large numbers of servos such as humanoid and hexapod style robots. Using an ATmega1280 CPU this controller is fully compatible with the Arduino Mega (1280). [Product Details...] | |
 |
ProtoSnap - LilyPad Development BoardSG$82.70 |
| The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your pro [Product Details...] | |
 |
Seeeduino Film - super flexible & slim ArduinoSG$39.70 |
| The Seeeduino FILM is an Arduino compatible development platform for space-sensitive projects. It’s flexible, super slim, has a built-in Li-Po charger, and is designed for wearable applications. [Product Details...] | |
 |
Arduino Nano CompatibleSG$39.90 |
| The DFRduino Nano USB Microcontroller V3 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The N [Product Details...] | |
 |
Quadcopter controllerSG$45.00 |
| Built in conjunction with the original KK Control board for controlling 4 rotor Aircraft - Quadcopters [Product Details...] | |
- «« Start
- « Prev
- 1
- Next »
- End »»
Results 1 - 17 of 17
Recently Viewed Products
- Solar panel - 0.9w , 7v (Category: Free Energy)
- ShiftBrite (Category: LED & Light)
- LED Matrix - Dual Color - Small (Category: LED & Light)
- Short U-bracket (Category: Hardware)
- XUP USB-JTAG Programming Cable (Category: FPGA Kit)
Products Categories
We Accept
Shopping Cart
PLEASE READ
We offer Academic pricing. Can not find a part ? Please write to sales@robot-r-us.com for more details.
Product Search
HTTPS Secure
Currency Selector
Manufacturers
Copyright © 2012 Robot-R-Us Singapore. All Rights Reserved. Designed and managed by
Singapore SEO Consultant Avi Abrams.
