Arduino UNO + 14 I/O LEDs + speaker

We bring you the Maker-UNO, an Arduino UNO compatible board designed and developed specially for students to learn coding and microcontroller. It is Arduino UNO R3 compatible, and by that, Maker-UNO can be programmed via Arduino IDE and compatible with all the example code and libraries for Arduino UNO.

We added a piezo buzzer that will act as simple audio output, of course you can program it. Yet, to ensure the compatibility of Arduino UNO, we have also put a slide switch to disable this piezo buzzer and leave the IO as it is. Aside from the standard LED on pin 13, Maker-UNO comes with a programmable LED on every digital pin, from pin D0 to D13. That is a lot of LEDs. We believe LEDs provide very good visual/light digital output where the eyes can observe, while piezo buzzer offers sound feedback where the ears can hear. That is good enough for outputs, how about input? We reserve the reset button and added a programmable button. How good is that? Now you can learn digital input, output, PWM (piezo buzzer and LED brightness) with just the Maker-UNO board.

Not to forget the change of FTDI chip to CH340 IC, the low cost yet stable USB to UART IC. Maker-UNO combines the simplicity of the UNO Optiboot bootloader (which load program faster), the stability of the CH340 and the R3 shield compatibility of the latest Arduino UNO R3. The USB MicroB socket for program loading and to power the board. Program can be loaded from your computer by utilizing your Android phone USB cable. Select "Arduino/Genuino UNO" for the "Board" in Arduino IDE and choose the correct COM port, you are ready to upload the code.

Features:

• SMD ATmega328P microcontroller (the same microcontroller on Arduino UNO) with Optiboot (UNO) Bootloader
• USB Programming facilitated by the CH340
• Input voltage: USB 5V, from computer, power bank or standard USB adapter
• 500mA (maximum) 3.3V voltage regulator
• 0-5V outputs with 3.3V compatible inputs
• 14 Digital I/O Pins (6 PWM outputs)
• 6 Analog Inputs
• ISP 6-pin Header
• 32KB Flash Memory
• 16MHz Clock Speed
• R3 Shield Compatible
• LED array for 5V, 3.3V, TX, RX and all digital pins
• Utilize USB Micro-B socket

Documents:

• Maker UNO User's Manual
• CH340 driver
  • Windows
  • Linux (Normally is readily installed)
  • Mac OS
• Arduino IDE Download

Related links:

• Arduino Uno Home Page
• Programming Reference
• Arduino Forum

Tutorials:

• Getting Started
• Maker UNO Projects
• Getting Started with Arduino - UNO, good for 1st time user.
• Arduino tutorial with projects, source code and schematics.

Customer Reviews:

You may also be interested in this/these product(s)

Maker UNO Edu Kit (Arduino Compatible) SG$18.70