PDFPrint

Battery Holder & Charger feed

Save on shipping cost  !!!

Call to arrange to pick up the product yourself.



Sort by:
Coin Cell Battery Holder - 20mm (Sewable)

Coin Cell Battery Holder - 20mm (Sewable)


SG$2.20
This is a coin cell holder for the common CR2032 type battery. [Product Details...]
CR2032 Button Battery Holder Case w/ On/Off Switch

CR2032 Button Battery Holder Case w/ On/Off Switch


SG$1.50
CR2032 Button Battery Holder Case with On/Off Switch [Product Details...]

Polymer Lithium Ion Battery - 3.7V 1100mAh

Polymer Lithium Ion Battery - 3.7V 1100mAh


SG$9.50
This is the highest energy density currently in production. Each cell outputs a nominal 3.7V at 1100mAh! Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins. [Product Details...]
6xAA Battery Holder(double layer)

6xAA Battery Holder(double layer)


SG$2.70
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells. It comes with a Red & Black Wires with side by side & stack connection. [Product Details...]

9V Battery Holder Box Case

9V Battery Holder Box Case


SG$2.50
This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don’t want the battery just hanging. It also has three mounting holes so you can attach it securely to your enclosure. It comes with [Product Details...]
Lipo Battery Charger - 2S / 3S

Lipo Battery Charger - 2S / 3S


SG$17.70
The B3AC Balance charger makes charging 2 or 3S lipos from your 110v or 240v mains power supply a simple task. [Product Details...]

LiOn Battery Pack 3600mAh

LiOn Battery Pack 3600mAh


SG$6.70
LiOn Battery Pack 3600mAh [Product Details...]
Lipo Voltage Checker (2S~8S) with Alarm

Lipo Voltage Checker (2S~8S) with Alarm


SG$9.70
The2S-8S Cell Checker with low voltage alarm features loud twin piezo alarms to notify you once your cells reach a user defined voltage. You can customize the alarm to sound at a voltage between 2.7v~3.8v per cell [Product Details...]

Battery Holder - 4xAA to Barrel Jack Connector

Battery Holder - 4xAA to Barrel Jack Connector


SG$1.60
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. [Product Details...]
1A Lithium Battery Charging Module Mini USB

1A Lithium Battery Charging Module Mini USB


SG$1.00
This is a 5V /1A lithium battery charging board, it can powered by a mini usb cable. There are two leds on board, when the red led light up, it shows that battery is on charging, and the green led will light up with red one light off when the battery is [Product Details...]

9V to Barrel Jack Adapter

9V to Barrel Jack Adapter


SG$0.50
9V battery adapter at one end and the other end is a 5.5x2.1mm, center-positive barrel jack. [Product Details...]
E4 Compact Balance LiPo 1-4 Cells Charger

E4 Compact Balance LiPo 1-4 Cells Charger


SG$43.50
Microchip controlled technology provides efficient and precise charge. Charge LiPo battery up to 4 cells.Adjustable charge rate from 100mAh to 4500mA. Automatically detects cell count. [Product Details...]

Power Supply - 15V 5A 110/240V 50/60Hz

Power Supply - 15V 5A 110/240V 50/60Hz


SG$25.50
This power supply will deliver a good 5A and 12V constant. It can be connected to your 110/240v home or workshop power socket. All you need is a common kettle plug, found at PC stores or your local electronics store. (you probably have a spare cord laying [Product Details...]
XT60 Male w/ 12AWG Silicon Wire 10cm

XT60 Male w/ 12AWG Silicon Wire 10cm


SG$3.50
These are high-current XT60 connectors commonly used in the RC hobby industry. They are sold as XT60 Male with 12AWG Silicon Wire 10cm long and are great for projects that involve bigger motors and controllers, such as our high-power motor drivers and Mo [Product Details...]

Female JST battery pigtail 12cm length

Female JST battery pigtail 12cm length


SG$3.50
This JST plug is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed.This is the female version of the connector . Two 12 cm 20-AWG wires are crimped inside the connector housing. The leads have si [Product Details...]
Lithium Polymer Battery Monitor for up to 4S

Lithium Polymer Battery Monitor for up to 4S


SG$8.70
This device plugs into the balance port on your battery. Should any one of your cells fall below 3.3v the light will change from Green to Red, indicating an unbalanced pack and that your battery should not be discharged further. [Product Details...]

5V / 6V 3A UBEC with Low Voltage Buzzer

5V / 6V 3A UBEC with Low Voltage Buzzer


SG$18.50
Current: 3A (Max. 4A) Input voltage: 6v~23v (2S ~ 5S Lipo) Optional Output: 5.1V or 6.1V [Product Details...]
6 x AA Battery Holder w/ Barrel Jack

6 x AA Battery Holder w/ Barrel Jack


SG$1.70
This is 6 x AA battery case storage holder with DC2.1 power jack for Arduino. Holds 6 x AA batteries. [Product Details...]

610mAh 2S 7.4v 20C Lipoly Pack

610mAh 2S 7.4v 20C Lipoly Pack


SG$12.70
Capacity : 610mAh Constant discharge: 20C Burst rate: 30C (15sec) Configuration : 2S 7.4v Pack size: 56x30x15mm Weight : 40g [Product Details...]
DC Barrel Jack Adapter - Male - for Arduino board

DC Barrel Jack Adapter - Male - for Arduino board


SG$1.40
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, [Product Details...]




Display #  
Results 1 - 20 of 37

Products Categories

We Accept


 


Shopping Cart

Your Cart is currently empty.

NOTE..


-> NO GST -> NO GST -> NO GST

Product Search



Advanced Search

Currency Selector




HTTPS Secure