![]() |
Proto Shield For Arduino UNOSG$2.90 |
This is a design for an open-source prototyping shield for Arduino and other Arduino compatible boards. It has tons of cool features, to make prototyping on your Arduino easy. This shield include a breadboard. If you want other colorful breadboard, please [Product Details...] |
![]() |
Heat Sink 11x11x5.5 SilverSG$0.50 |
A heat sink is a passive heat exchanger that cools a device by dissipating heat into the surrounding medium. [Product Details...] |
![]() |
3-Pin Female JST PH-Style Cable (30 cm) with Male Pins for 0.1"SG$2.50 |
This 12-inch (30-cm) cable has 26 AWG wires with a 3-pin female JST PH-style connector that mates with the connector on 3-pin Sharp analog distance sensors. The other ends of the wire are terminated with male pins for 0.1" housing. [Product Details...] |
![]() |
Servo Y Splitter Cable 12"SG$6.15 |
12" Y-cable can be used to connect two servos to a single servo control line. [Product Details...] |
![]() |
6x1 F-F 6" Cable for ShiftBritesSG$2.60 |
These 6" (15 cm), six-conductor cables can be used to chain together ShiftBrite or ShiftBar modules. The cable wires are colored to match the ShiftBrite pin-out, with black for ground and red for power. The cable is has female 0.1" 6x1 connectors on both [Product Details...] |
![]() |
6x1 F-F 12" Cable for ShiftBritesSG$2.95 |
These 12" (30 cm), six-conductor cables can be used to chain together ShiftBrite modules. The cable wires are colored to match the ShiftBrite pin-out, with black for ground and red for power. The cable is has female 0.1" 6x1 connectors on both ends. [Product Details...] |
![]() |
Passive PoE Cable SetSG$6.50 |
Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these power over Ethernet adapters, you can do just that! [Product Details...] |
![]() |
170-Point Breadboard - WhiteSG$1.00 |
This 47×35 mm (1.84×1.37") breadboard has 17 rows of tie points, enough for up to two 14- or 16-pin DIP ICs. Although it is difficult to see in the pictures, the rows and columns are conveniently labeled. The board features an adhesive backing and two mou [Product Details...] |
![]() |
Wires with Pre-crimped Terminals 5-pc Rainbow Assortment F-F 12"SG$2.65 |
These premium wires are stranded 26AWG wires with female terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. The assortment of 12" (30 cm) wires includes fiv [Product Details...] |
![]() |
Wires with Pre-crimped Terminals 5-pc Rainbow Assortment M-F 12"SG$2.65 |
These premium wires are stranded 26AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. The assortment [Product Details...] |
![]() |
Wires with Pre-crimped Terminals 5-pc Rainbow Assortment M-M 12"SG$2.65 |
These premium wires are stranded 26AWG wires with male terminals on both ends. Together with our 0.1" crimp connector housings, these wires can be used to make custom cables with 0.1" (2.54mm) connectors. The assortment of 12" (30 cm) wires includes five [Product Details...] |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 5-PackSG$0.20 |
These single-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. [Product Details...] |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 5-PackSG$0.30 |
These two-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. [Product Details...] |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 5-PackSG$0.30 |
These three-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. [Product Details...] |
![]() |
2.54mm 8Pin 10mm Needle Female Pin Header for Arduino Shield 5pcSG$0.80 |
2.54mm 8 Pin 10mm Needle Female Pin Header for Arduino Shield (5pcs) [Product Details...] |
![]() |
2.54mm 6Pin 10mm Needle Female Pin Header for Arduino Shield 5pcSG$0.70 |
2.54mm 6 Pin 10mm Needle Female Pin Header for Arduino Shield (5pcs) [Product Details...] |
![]() |
USB Cable A to Mini-BSG$5.30 |
This USB cable is six feet long (1.8 m) and has a male type-A connector on one end and a male mini-B connector on the other. This cable works with high-speed USB devices. [Product Details...] |
![]() |
BreakawayMaleHeader: 0.100" 1x40-Pin, StraighSG$0.60 |
This connector is a single-row, 40-pin, straight male header strip that can be broken into smaller strips. [Product Details...] |
![]() |
Breakaway Male Header: 0.100" 2x40-PinSG$3.70 |
This connector is a double-row, 80-pin (2×40), straight male header strip that can be broken into smaller strips. [Product Details...] |
![]() |
POL967 Breakaway Male Header: 0.100" 1x40-Pin,Right AngleSG$2.50 |
This connector is a single-row, 40-pin, right-angle male header strip that can be broken into smaller strips and is great for low-profile connections. [Product Details...] |