7 inch HDMI Display with Capacitive Touchscreen

SG$99.50

INTRODUCTION

This is a HDMI display with capacitive touchscreen. It comes with a 7" LCD screen with capacitive touch panel overlay on it. The touch panel supports up to 5 touch points. And it adopts DFRobot USB free-driver technology, no special requirement of drivers. You can use it as easy as keyboard or mouse. It can be directly plugged to PC for touching control. In combination with HDMI HD screen, it can turn a large PC to a tablet immediately.

The screen supports Windows, Linux and MAC OS. It can be used on Raspberry Pi and other HDMI device. (Please setup the OS config file first before running it - refer to video or reference below) We also make some special hole to make it compatible with Arduino screw hole. You can mount them on the back of the display directly.

There is no need for external power supply for the screen, it can be powered by USB port and HDMI port. The display also supports back light adjustment. It is very convenient to adjust backlight by potentiometer on the back of the display.

e.g. Make Mini PC using Raspberry Pi 3 and 7'' HDMI Display

Videos : -

https://youtu.be/kcri1s-66B4 ,

https://youtu.be/Aasot_GEe5o ,

https://youtu.be/z0F5sDRo8XM

In this tutorial series we will build a Pi hub with MQTT broker.

Hardware needed:

Camera for Raspberry Pi

7'' HDMI Display with Capacitive Touchscreen

Raspberry Pi 3 Model B

Note: Please guarantee the external power supply current is above 2A@5V when it is driven by raspberry Pi. The lower current will reduce the touching sensitivity.