PDFPrint

USB_uSD_I2C feed

Save on shipping cost  !!!

Call to arrange to pick up the product yourself.



Sort by:
PmodRS232 - Serial converter & interface

PmodRS232 - Serial converter & interface


SG$30.80
Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver. [Product Details...]
µUSB - USB to Serial UART Bridge Converter

µUSB - USB to Serial UART Bridge Converter


SG$9.00
The μUSB (microUSB) is a USB to Serial converter module which is simple, cost effective, very small and easy to use. [Product Details...]

USB-RS485  Serial Interface

USB-RS485 Serial Interface


SG$35.00
The USB-RS485 is a complete, self powered, USB to RS485 interface working at any baud rate up to 250k baud. It features automatic bus turn-around - any time your not transmitting the module is listening. [Product Details...]
Breakout Board for microSD Transflash

Breakout Board for microSD Transflash


SG$6.70
Breakout board for the microSD socket. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage. [Product Details...]

Breakout Board for USB microB

Breakout Board for USB microB


SG$1.70
This simple board breaks out a micro-B USB connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. [Product Details...]
Breakout Board for USB miniB

Breakout Board for USB miniB


SG$2.60
This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB miniB connector to your breadboard - here it is. Also good for an un-regulated, non-limited 5V sup [Product Details...]

USB3.0 Type A female socket breakout board -USB3-AF-BO-V1A

USB3.0 Type A female socket breakout board -USB3-AF-BO-V1A


SG$9.90
USB3-AF-BO-V1A is a simple USB3.0 Type A female socket breakout board. It brings all 9 pins of a USB3.0 Type A connector to screw terminal blocks and headers for easy testing, prototyping and breadboard connection. For breadboard connections, user can use [Product Details...]
USB 2.0 Type A male plug breakout board -USB-AM-BO-V1A

USB 2.0 Type A male plug breakout board -USB-AM-BO-V1A


SG$5.90
USB-AM-BO-V1A is a simple USB Type A male plug breakout board. It brings all 4 pins of a USB2.0 Type A connector to screw terminal blocks and headers for easy testing, prototyping and breadboard connection. For breadboard connections, user can use the 4pi [Product Details...]

USB3.0 Type B female socket breakout board -USB3-BF-BO-V1A

USB3.0 Type B female socket breakout board -USB3-BF-BO-V1A


SG$11.70
USB3-BF-BO-V1AUSB3-BF-BO-V1A is a simple USB3.0 Type B female socket breakout board. It brings all 9 pins of a USB3.0 Type B connector to screw terminal blocks and headers for easy testing, prototyping and breadboard connection. For breadboard connections [Product Details...]
microSD Shield

microSD Shield


SG$18.90
All new microSD shields have a voltage converter chip on-board that converts the Arduino 5V signals to 3.3V signals in accordance with SD specifications. [Product Details...]

FTDI Basic Breakout - 3.3V

FTDI Basic Breakout - 3.3V


SG$19.70
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference w [Product Details...]
FTDI Basic Breakout - 5V

FTDI Basic Breakout - 5V


SG$19.70
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference wit [Product Details...]

PmodUSBUART - USB to UART Interface

PmodUSBUART - USB to UART Interface


SG$17.70
The PmodUSBUART module provides a USB to UART interface powered by the FTDI FT232RQ. The PmodUSBUART uses the standard 6-pin connector to connect to the host device and a micro USB connector to connect to a PC or other USB capable device. The FTDI chi [Product Details...]
USB-ISS - Enhanced USB-I2C Module

USB-ISS - Enhanced USB-I2C Module


SG$38.70
The USB-ISS Multifunction USB Communications Module provides a complete interface between your PC and the I2C bus, SPI bus, a Serial port and general purpose Analogue Input or Digital I/O. The module is powered from the USB. Operating voltage is selectab [Product Details...]

USB interface for Arduino Optiboot IC (come with USB cable)

USB interface for Arduino Optiboot IC (come with USB cable)


SG$6.70
This is a general board for the USB interface. It uses the CP2102 USB to serial interface IC. The USB interface can be use with the ATmega328 w/ Arduino Optiboot IC for downloading the program. [Product Details...]
USB Serial Light Adapter (Arduino Compatible)

USB Serial Light Adapter (Arduino Compatible)


SG$18.70
This version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The 8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .in [Product Details...]

CP2104 USB-to-Serial Adapter Carrier

CP2104 USB-to-Serial Adapter Carrier


SG$6.70
This USB-to-serial adapter lets you easily connect a TTL serial device to a PC by acting as a virtual serial port. The board is a Micro-USB carrier for the Silicon Labs CP2104 USB-to-UART bridge that provides access to all of its control signal pins and G [Product Details...]
Micro USB Type B Connector

Micro USB Type B Connector


SG$1.20
The DIY kit for Micro USB type B connector. Will require soldering of wires to this connector. [Product Details...]

USB Type A Male Connector

USB Type A Male Connector


SG$1.20
The DIY kit for USB type A connector. Will require soldering of wires to this connector. [Product Details...]
TCA9548A I2C Multiplexer

TCA9548A I2C Multiplexer


SG$9.90
Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttling the commands to the selected set of I2C pins with your command. Using it is fairly straight-forward: the multiplexer [Product Details...]


  • «« Start
  • « Prev
  • 1
  • Next »
  • End »»


Display #  
Results 1 - 20 of 20

Products Categories

We Accept


 


Shopping Cart

Your Cart is currently empty.

NOTE..


-> NO GST -> NO GST -> NO GST

Product Search



Advanced Search

Currency Selector




HTTPS Secure